Waterwarn Pipes
Waterwarn Pipes

Listed with the National Sanitary Foundation, Waterwarn purple pipes are used to transport reclaimed water including for landscapes and golf courses.

These color-coded pipes are designed exclusively to transport reclaimed water and eliminate problems that may arise from cross contamination with domestic potable water supply.  As an extra safety precaution one side of the pipe is printed with pipe specifications (size, pressure rating, etc.) and both sides are printed with a warning that reads "WATERWARN - Caution: Reclaimed Water"


Belled End Solvent Weld PVC Pipe (Schedule 40, Class 200, Class 315)

  • Cell Class 12454-B according to ASTM-D 1784 Type 1 Grade 1
  • ASTM-D 1785 for plain end pipe
  • ASTM-D 2672 for solvent weld bell end pipe
  • Available in plain or belled ends
  • Standard 20' Lengths
  • Schedule 40 Diameters 1/2" to 6"
  • Class 200 Diameters 3/4" to 6"
  • Class 315 (SDR-13.5) Diameters 1/2" to 4"


Gasketed (O'Ring) PVC Pipe

  • Cell Class 12454 B according to ASTM-D 1784 Type 1 Grade 1
  • Gasketeted pipes meet ASTM-D3139
  • Available in Gasketed ends
  • Standard 20' Lengths
  • Diameters 21/2", 3", 4", 6"



WATERWARN PVC PIPE is warranted to be free of manufacturing defects in material and workmanship and to meet and perform to the specifications and standards imprinted on the product for a period of 5 years from date of purchase. If WATERWARN proves defective due to manufacturing process in material or workmanship during the warranty period, U.S. POLYMERS, INC.will provide new replacement units of the same type and size at not cost. No remedy will be granted under this warranty if WATERWARN is not used and/or installed in accordance with ASTM-2855 and accepted industry standards with respect  to use of recommended primer, solvent cement and proper joining methods, and install in accordance with all Federal, State and Local codes or laws governing the installation of such product.

This warranty does not extend to claims arising from the use of the product as conduit for the transport or storage of compressed air and other compressed gases, or other uses not recommended by PVC industry or misuse or improper handling and./or installation of the product, nor does it extend to any losses except the replacement of the defective units. In all events this warranty extends to material only, and U.S. POLYMERS, INC. shall not be liable for any installation labor of defective or replacement material.

Proof of purchase with the date thereof must be presented to the satisfaction of U.S. POLYMERS, INC. with any claim made pursuant to this warranty. This warranty is in lieu of all other implied and expressed warranties, which are merged into it and expire at the end of this warranty period. All claims must be processed through the claimant's seller, and no replacement will be allowed by U.S. POLYMERS, INC. unless the reported defect has been inspected and approved for replacement by U.S, POLYMERS, INC., its authorized agent, or its representative.